The 1N5408 is a high-current rectifier diode with a maximum voltage rating of 1000V and a forward current rating of 3A. It is designed for power rectification, voltage regulation, and surge protection in power supplies, battery chargers, and electronic circuits. Its rugged design ensures reliability in high-power applications.

The 1N4007 is a general-purpose rectifier diode capable of handling up to 1000V reverse voltage and 1A forward current. It is widely used in AC to DC rectification, power supplies, and polarity protection. Known for its high efficiency and reliability, the 1N4007 is an essential component for both hobbyist and industrial applications.

The Micro Push Button Switch (4 Pin, DIP) is a compact, momentary tactile switch commonly used in electronics projects, prototyping, and embedded systems. It provides a tactile feedback click when pressed and is normally open (NO) until activated. With a DIP (Dual In-line Package) 4-pin design, it is easy to solder onto PCBs or use on breadboards for prototyping.

The 5.1KΩ (5100 Ohm) 1/4W Resistor is a high-quality, through-hole carbon film resistor, commonly used in voltage dividers, current limiting, pull-up/pull-down circuits, and signal processing. With a ±5% tolerance, it provides stable and reliable performance, making it an essential component for electronics projects, circuit prototyping, and industrial applications.

The 10Ω (10 Ohm) 1/4W Resistor is a high-quality, through-hole carbon film resistor, commonly used for current limiting, voltage regulation, signal conditioning, and general electronic circuits. With a ±5% tolerance, it provides stable and reliable performance, making it essential for DIY electronics, circuit prototyping, and professional applications.

The 100Ω (100 Ohm) 1/4W Resistor is a high-quality, through-hole carbon film resistor, commonly used in current limiting, LED protection, signal conditioning, and general electronic circuits. With a ±5% tolerance, it provides stable and reliable performance, making it a fundamental component for DIY projects, circuit prototyping, and professional electronic designs.

The 10KΩ (10,000 Ohm) 1/4W Resistor is a high-precision, through-hole carbon film resistor designed for voltage dividers, signal processing, pull-up/pull-down circuits, and general electronic applications. With a ±5% tolerance, this resistor offers stable and reliable performance, making it essential for DIY projects, circuit prototyping, and professional electronic designs.

The 100KΩ (100,000 Ohm) 1/4W Resistor is a precision through-hole resistor with a tolerance of ±5%, ideal for signal conditioning, voltage dividers, pull-up/pull-down circuits, and general electronics applications. Made from carbon film material, this resistor ensures low noise and stable performance in both DIY and professional electronic circuits.

The 1MΩ (1 Mega Ohm) 1/4W Resistor is a precision through-hole resistor with a tolerance of ±5%, ideal for electronic circuits, signal conditioning, and voltage dividers. Designed for low-power applications, this carbon film resistor offers stable performance and high reliability.

The 10K B10K Variable Resistor is a linear-taper (B-type) potentiometer with three pins, designed for adjusting voltage levels, controlling signal strength, and fine-tuning electronic circuits. This potentiometer is commonly used in audio volume control, motor speed regulation, and DIY electronics projects.

The 10K Ohm 3296W-1-103 Trim Pot Trimmer Potentiometer is a high-precision variable resistor designed for fine-tuning and calibration in electronic circuits. With multi-turn adjustment, it offers precise resistance control, making it ideal for voltage dividers, sensor calibrations, and circuit tuning in both prototyping and final applications.

The 100uF 50V Aluminium Electrolytic Capacitor is a high-capacitance and high-voltage electrolytic capacitor designed for use in power supplies, filter circuits, audio applications, and various electronics projects. With a capacitance of 100uF and a voltage rating of 50V, this capacitor offers reliable performance for storing electrical energy in DC circuits.

The 330 Ohm Resistor (1/4W, Through-Hole) is a high-precision, general-purpose resistor used for current limiting, voltage division, and circuit protection. It is ideal for LED current limiting, Arduino projects, power supplies, and electronic circuits.

The 1K Ohm Resistor (1/4W, Through-Hole) is a high-precision, general-purpose resistor commonly used for pull-up/pull-down circuits, voltage dividers, current limiting, and signal conditioning. Ideal for Arduino, ESP32, Raspberry Pi, and various electronic applications.

The 220 Ohm Resistor (1/4W, Through-Hole) is a high-precision, general-purpose resistor used for current limiting, voltage division, and circuit protection. It is ideal for LED current limiting, Arduino projects, power supplies, and electronic circuits.